Short instruction How to measure the correct width of a watch strap
Move your mouse to read
Take, preferably, a caliper ruler or otherwise a standard ruler. Our advice is to use a ruler with a clear ‘mm’ denotation for the highest precision during the measuring.
Measure the length between the two ‘lungs’ of the watch. This area is pointed with red arrows in the image above. Always check if you are measuring the width starting from the right 0-point on your ruler. If you don’t start from the 0-point you will probably measure a wrong width!
Write down the first width you just measured. Check your first measured width by measuring a second time to know for sure you have the correct width. If you have the correct width, then you can use it for our online offer tool or send it directly to us in an e-mail. Please provide the correct width always in 'mm'.
Help while ordering?
We are available for all your questions!
Do you encounter any issues while trying to order?
Don't worry, you can also order easily by e-mail or by telephone! firstname.lastname@example.org | +31 (0) 492 39 05 87
Features a forked end for strap changes and a pointed end for use with watch cases that feature pin holes in the lug ends.
Or a strap change simply insert the forked end between the lug end and your watch strap, Push down and pull away from the lug end to release the spring bar or pin. You can then use the tool to compress the spring bar to insert the new strap.
Any questions about this product? Do not hesitate to contact us.
Great communication, good product. Would definitely recommend.
Posted on 2/28/2017
Unfortunately, we do not offer any alternatives for this product. This information may be outdated, contact our customer service for the most recent information about this product: email@example.com
Unfortunately, we cannot tell you yet which battery is compatible for this product. Therefore we want to ask you to contact us for more information: firstname.lastname@example.org