Short instruction How to measure the correct width of a watch strap
Move your mouse to read
Take, preferably, a caliper ruler or otherwise a standard ruler. Our advice is to use a ruler with a clear ‘mm’ denotation for the highest precision during the measuring.
Measure the length between the two ‘lungs’ of the watch. This area is pointed with red arrows in the image above. Always check if you are measuring the width starting from the right 0-point on your ruler. If you don’t start from the 0-point you will probably measure a wrong width!
Write down the first width you just measured. Check your first measured width by measuring a second time to know for sure you have the correct width. If you have the correct width, then you can use it for our online offer tool or send it directly to us in an e-mail. Please provide the correct width always in 'mm'.
Help while ordering?
We are available for all your questions!
I ordered the incorrect strap for my wife's watch, and after a couple of emails they found the correct one for the watch and replaced it for us supper service from a company so far from us here in New Zealand. highly recommend to all. cheers, Tony.
We can offer you the following alternatives. You can order one of these alternatives instead of the original product in case of non-stock items. Alternatives will always fit as good as the original product but may be slightly different in color or material type. If you have any doubts or questions, then please contact us to be sure.