Short instruction How to measure the correct width of a watch strap
Move your mouse to read
Take, preferably, a caliper ruler or otherwise a standard ruler. Our advice is to use a ruler with a clear ‘mm’ denotation for the highest precision during the measuring.
Measure the length between the two ‘lungs’ of the watch. This area is pointed with red arrows in the image above. Always check if you are measuring the width starting from the right 0-point on your ruler. If you don’t start from the 0-point you will probably measure a wrong width!
Write down the first width you just measured. Check your first measured width by measuring a second time to know for sure you have the correct width. If you have the correct width, then you can use it for our online offer tool or send it directly to us in an e-mail. Please provide the correct width always in 'mm'.
Help while ordering?
We are available for all your questions!
The first strap sent was the wrong type. It was returned and after a short delay the correct one was sent and received. Communication was good and prompt. Will use them again when this strap wears out....4/5 years!
Unfortunately, we do not offer any alternatives for this product. This information may be outdated, contact our customer service for the most recent information about this product: firstname.lastname@example.org
Bent u op zoek naar de juiste, bijpassende batterij voor dit product? Hieronder vindt u een overzicht van passende batterijen.